|
Forum: | Technical Questions & Answers |
Topic: | Bolt pattern, offset for front rims. |
|
Want to register?
|
If you have previously registered, but forgotten your password, click here.
T O P I C R E V I E W |
lavka | I want to buy a set of plain steel wheels that will be a drop-in replacement for the prowler front wheels. The new rims must be able to accept the tire pressure sensor and stock run flat tire. Anybody know what bolt pattern and offset I need to ask for or where to buy these? Its a 17" x 8" rim right? |
lavka | OK I found this from an old post: 5 bolts on 4.5" bolt pattern Front 17 x 7.5, 5.5 rear offset / backspace Rear 20 x 10, 6.25 rear offset / backspace Is this good info? Any concerns about step-down clearing the brake caliper?
|
Bob Goetz | I was going with Smoothys and wide whites until I got American Racing to make my rims my way, here is a link http://www.whitewallsplus.com/smoothie.htm you can drop to a 15 in the front if and only if they make what I think they call a shallow drop rim by this I mean the outer rim only has about a 1/2 inch step down and you can drop to 17 in the rear, they have 17 wide whites also. Hope this helps. ------------------ < CLICK HERE FOR NEW REALROD.COM PARTS > < Click on my banner to go to realrod.com > |
lavka | Thanks Bob. |
Bob Goetz | also ion the fronts with a 15 inch wheel if I measured right you will only be able to us a 7 or 6 1/2 inch rim width |
Contact Us | Prowler Online Homepage
All material contained herein, Copyright 2000 - 2020
POA Terms of Service